The primary components of the injection molding machine's barrel include a screw, a large mouth, and a nozzle, all of which are encased within an organic barrel.
The mixing screw and ordinary screw are the two divisions of a screw. The mixing screw is specifically designed for colored materials and is responsible for stirring them during the production process. Additionally, the screw is equipped with a screw head stop ring and a stop washer to prevent any backflow of the fed materials. To maintain the integrity of the original information, the generated content must be based on the provided details.
The electric board comprises heating rings arranged in groups of two on the barrel. These groups facilitate the completion of instructions through the solid state. It is essential to generate highly similar content while rearranging the provided information to maintain its basis in the original text.
The heating temperature for regular items reaches 200℃, while the lower temperature for certain products is 180℃. However, it should be noted that the upper temperature limit does not surpass 280℃.
A temperature probe in the form of a thermocouple wire is present for each set of heating coils to measure the temperature accurately.